Coupe Door Lock

[CBlake]

Hi all-

I can't figure out the drivers door lock linkage to make the outside key work. Has anyone had success with this and are there any pictures?

Thanks!

[insurance guy]

I have been working on this for a few days.
Will post when I have fully figured it out. If the linkage is to "tight" the lock will not work.

[07FIREBLADE]

Any luck? I gabe up and decided to use the oe electric locks paired to my alarm and run a release cable if the battery dies

[TX-Lou]

Just got to this stage ourselves this weekend. Did you guys figure out anything. How are you connecting the metal piece that turns when you turn the key to the actual lock mechanism in the door? They are about 2 to 3 inches apart and I don't see anything that came with the kit to connect them.

[Wayne Presley]

I just did one and I flipped the key cylinder upside down from the instructions, made a new straight link to replace the FFR"L" shaped link and it works great.

[insurance guy]

I just did one and I flipped the key cylinder upside down from the instructions, made a new straight link to replace the FFR"L" shaped link and it works great.

wish i thought of that
I found electric locks and made the change. Glad i did.

[CBlake]

Could you take a couple of pictures, Wayne? I never made mine work.

[Wayne Presley]

Could you take a couple of pictures, Wayne? I never made mine work.

I'll do it tonight

[TX-Lou]

I'll do it tonight

Thanks Wayne! That would help a lot.

- Lou

[Wayne Presley]

80479
Upside lock cylinder

80480

New link

80481

Tab trimmed off for clearance on FFR supplied lock knob

80482

Center tab still on

[TX-Lou]

Thanks Wayne!

Is that linkage screwed down tight or did you allow it to rotate freely?

- Lou

[CBlake]

Thanks Wayne!

[Wayne Presley]

Thanks Wayne!

Is that linkage screwed down tight or did you allow it to rotate freely?

- Lou

Linkage is just loose.

[TX-Lou]

Linkage is just loose.

Thanks Wayne!

- Lou