Oil cooler installation

[neilmathieu]

Hi,
I need to know all instructions to fix my oil cooler with the relocating kit from FF5 ; I see many arrows on the parts and I am not sure to connect the right hose to the IN or to the OUT marks. If you have some pictures or draw to do the right connections, I would appreciate.

[LewPoberezny]

I would consider an Earls sandwich thermostat for the remote oil cooler.

http://static.summitracing.com/global/images/prod/norm/ear-502erl_w_m.jpg

[neilmathieu]

What I need is a schematic of the lines connections to the Inlet and Outlet arrows ; on the engine block, I fixed the part with 4 holes , two with opposite arrows and two with arrows in the same direction . I fixed the oil filter part between the engine and the oil cooler ; on the oil filter part, there is an inlet and an outlet. I fixed a line from the engine to the oil filter inlet and the outlet to the oil cooler. From the oil cooler I fixed the other line to the engine with the inlet one way. A schematic will help me to know if I am OK. Thanks.

[CDXXVII]

See if this helps. I found it on a post somewhere and plan to use it when I get to that portion of the build
2697