87Biturbo
06-28-2011, 07:11 AM
Has anybody installed the Danhard heater in their roadster. The 1415 model looks like a pretty long unit, but not very deep. (Height 4.625 x Width 15.75 x Depth 8.75). I think with some very small modifications, It can fit between the dash and the firewall without doing the firewall forward mod and without putting the blower fan in the engine compartment. The pic is actually the 1416 model which has the 2 ducts sticking out the side adding about at 1" to the 4.625 height.
2639
Specs:
16 TUBE COIL
3-Speed Motor
Approximately 250 CFM Air Delivery
12 Volt Motor or 24 Volt Motor
Up to 25,000 BTUH’s Per Hour
It looks like you can get them at JCWhitney and/or Sears for around $200
I’m interested if anybody has used them and if they are any good.
Any Comments?
2639
Specs:
16 TUBE COIL
3-Speed Motor
Approximately 250 CFM Air Delivery
12 Volt Motor or 24 Volt Motor
Up to 25,000 BTUH’s Per Hour
It looks like you can get them at JCWhitney and/or Sears for around $200
I’m interested if anybody has used them and if they are any good.
Any Comments?