FFR coolant filler neck

[jlfernan]

Looking through my engine parts and came across the cheesy coolant plastic filler neck. On my first car, FFR supplied a nice aluminum one. If any one has one they don't need, and want to sell, please contact me. If not, a source to buy one. The one I'm looking for is like this in the photo. These are the ones FFR used to supply.

69997

[GoDadGo]

Here You Geaux!

https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=inline%20filler%20neck&N=4294919309

[Jim Schenck]

Just as an FYI, we changed from using the aftermarket aluminum ones due to problems with them sealing and maintaining the correct cap pressure. We probably went through three if not four suppliers that all had the same issues. If you are set on using aluminum and are having issues with it sealing you can double the gasket on the bottom of the cap (the smaller one that hits the bottom of the opening, not the big one inside the main part of the cap). You need to buy a second cap to get the gasket off of but that has fixed the issue for us in the past.

[i.e.427]

Looking through my engine parts and came across the cheesy coolant plastic filler neck. On my first car, FFR supplied a nice aluminum one. If any one has one they don't need, and want to sell, please contact me. If not, a source to buy one. The one I'm looking for is like this in the photo. These are the ones FFR used to supply.

69997

I think we have an unused one here in the shop. Let me look tomorrow and get back to you.

Frank

[i.e.427]

I think we have an unused one here in the shop. Let me look tomorrow and get back to you.

Frank

This is the one I found in the shop J.

http://www.jegs.com/i/JEGS/555/53045/10002/-1?CAWELAID=1710748397&CAGPSPN=pla&CAAGID=39714413703&CATCI=pla-293995373017&CATARGETID=230006180039220954&cadevice=c&gclid=CjwKEAjwqIfLBRCk6vH_rJq7yD0SJACG18frSSp3r7nd MLaY5dPOE_si6MwhKtmut63s5duuzryE4hoCowPw_wcB

I can post a picture of it on our site and link it for you. $30 shipping to you work?

Frank