RooRocks
06-27-2011, 11:32 AM
Problem 89649186491264 this weekend
Ordered a new Zoom stage 3 clutch but Summit sent me a 10.5" 26 spline clutch plate instead of the 10 spline so I called a local performance shop and asked if clutch plates were interchangeable and they told me yes as long as they were both 10.5". So I bought a McLeod clutch disk from them and installed it with my Zoom pressure plate. I did have the flywheel resurfaced, I know for a fact I put the clutch disk in correctly and I torqued down the pressure plate to 25lbs as recommended. I put tranny back on the motor and reinstalled the engine/trans. I just now got around to hooking up the clutch cable and I cannot pus the clutch pedal down, it won't even budge...
Any ideas?
Ordered a new Zoom stage 3 clutch but Summit sent me a 10.5" 26 spline clutch plate instead of the 10 spline so I called a local performance shop and asked if clutch plates were interchangeable and they told me yes as long as they were both 10.5". So I bought a McLeod clutch disk from them and installed it with my Zoom pressure plate. I did have the flywheel resurfaced, I know for a fact I put the clutch disk in correctly and I torqued down the pressure plate to 25lbs as recommended. I put tranny back on the motor and reinstalled the engine/trans. I just now got around to hooking up the clutch cable and I cannot pus the clutch pedal down, it won't even budge...
Any ideas?