FFR 289 Roadster

[michael everson]

Up for sale I have a 289 Mark 4 Cobra from Factory five. Kit number F5R1007364RD

Disclaimer: This car was almost entirely built by Joe Leone (Oldguy668) and finished by me. I have gone through the car and have found no issues. Joe has built 6 FFR cars.

Engine: rebuilt 1967 289. Trickflow aluminum heads, carb setup with Pertronix distributor.

Transmission: Tremec 3650 with new Ford Motorsport clutch and aluminum bell housing. Hydraulic clutch.

Rear: Moser 8.8 with 3:31 gears and a Wave-Trac differential. Moser axles.

Interior: Custom blue carpeting to match the paint. Russ Thompson Turn signal. FFR Speedhut gauges. Lokar ebrake mounted on tunnel top.

Tires and wheels: True wire spoke wheels with Mickey Thompson tires.

Car is currently titled in Florida. Can be seen in Norton MA
make an offer.

https://farm5.staticflickr.com/4258/35764661702_7e4422fe2d_z.jpg

https://farm5.staticflickr.com/4231/35894055026_3a0f20f348_z.jpg

https://farm5.staticflickr.com/4324/35764659832_b3847c1fa2_z.jpg

https://farm5.staticflickr.com/4325/35125661483_994641f7c7_z.jpg

https://farm5.staticflickr.com/4309/35764657422_bd4e3b0949_z.jpg

https://farm5.staticflickr.com/4209/35125660803_41e95687d6_z.jpg

https://farm5.staticflickr.com/4314/35894049646_1ac49edc55_z.jpg

[oldguy668]

I asked Mike Everson to finish the detail work for me. I had surgery last July and I'm just not recovering as rapidly as I had been hoping. Mike is a good friend and an excellent builder, so I have every confidence that he'll de-bug it thoroughly. The 289 block means it's exempt in Massachusetts, although it is currently titled in Florida.

[rmally]

Hello, PM sent.

Thanks

[michael everson]

TTT I will work on getting pics back up this weekend. Price has been reduced to $32,000.00

[KDubU]

Somebody needs to jump on this.

[michael everson]

https://farm5.staticflickr.com/4306/35095559994_df754372a0_z.jpg

https://farm5.staticflickr.com/4314/35894592786_55e6fd90a9_z.jpg

https://farm5.staticflickr.com/4298/35095557854_812fcb7d8f_z.jpg

https://farm5.staticflickr.com/4298/35894590956_568236620b_z.jpg

https://farm5.staticflickr.com/4282/35894590476_e0587b0e6b_z.jpg

[japollon]

Mike, can you tell me where that differential cover is sourced?

Thanks

[michael everson]

TTT Still for sale. This car will be titled in MA in the next couple of weeks.
Mike

[AC Bill]

Mike, can you tell me where that differential cover is sourced? Thanks

That is a really nice cover, although nobody would ever see it..lol

[michael everson]

I will ask Joe where it came from.
Mike

[michael everson]

Please note: This car went through the SP inspection today and will have a MA vin and title within a few weeks. It will be titled as a 2010 replica.
Mike

[oldguy668]

Moving to the top. I need this car gone soon. Mike needs his space back. Price is negotiable.

[Jimtmich]

Here are a few questions that will help everyone out:
Was this build from the 289 USRRC kit?
Do you have the roll bar?
Are the wheels bolt on or pin drive?
Do you have any details on the engine rebuild?
What heads, what cam, what crank, what rods etc?
Thanks

[oldguy668]

Sorry for the delay in responding. I don't get out here as much as I should.

This build is a Factory Five FIA body and frame. I deleted the side vents and shaved off the hump on the trunk lid.
I have a driver side chrome roll bar and a set of cut down fat rollbars ready to install.
The wheels are 30 spoke bolt ons. They come with 3-bar spinners or hex centers depending on the look you want.
The engine is a '68 289 block that had a stock rebuild just before I bought it. I added TrickFlow aluminum heads, Ford E cam, roller rockers and dog-bone roller lifters. The bottom end is stock.

I'm very motivated to sell the car soon. I'm now looking for $30,000 or best offer. Call me at 978-six eight seven-7105 anytime.

[oldguy668]

Still available.....call anytime. Number in preceding post.

[SerpantFL]

Oldguy, Would you happen to have a video of the car? It looks sharp in a very subdued way. I am just not a stripe fan. I also like, from the looks of it, the reverse carb mount so as to not kink the throttle cable. If sold, thanks anyway... Super clean build.

[michael everson]

Sorry. Sold