Clutch Pedal Stop

[Copper]

I am looking at ideas for a stop and I cant reply on the other forum. http://www.ffcars.com/forums/42-factory-five-gtm-forum/276070-pictures-clutch-pedal-stop.html

Why not just drill a hole, weld a nut, and use a bolt with a jam nut on the pedal box?

[Roger Reid]

I am looking at ideas for a stop and I cant reply on the other forum. http://www.ffcars.com/forums/42-factory-five-gtm-forum/276070-pictures-clutch-pedal-stop.html

Why not just drill a hole, weld a nut, and use a bolt with a jam nut on the pedal box?

That's exactly what I did.

[VRaptor SpeedWorks, LLC]

That is what we do also. We don't weld a nut....it would be easier to adjust if it was welded, but it's pretty much a one-time adjustment and done, so I've never bothered to go thru the extra work of dragging out the welder since it's not really in a welding-friendly location anyway....we just put a nut on both sides of the panel.

[Copper]

I figured the advantage of in car adjustment by my self is worth the weld time.

I may have to drag the welder from under a pile stuff anyway. I have a really nice ECU/Power Cell/Puke tank bracket on order that I might also weld in. ;)