View Full Version : Wiper Motor Wiring ?
Jacob
05-23-2017, 04:01 PM
Does anyone sell a male plug-in that will match up to the female plug-in on the wiper motor? Seems like it would make a neater more fail safe way of making connections...thanks!
michael everson
05-23-2017, 04:45 PM
http://www.**********accessories.com/p-313-wiper-electrical-plug.aspx
Pricey.
Mike
Misterfubar
05-23-2017, 06:05 PM
http://www.**********accessories.com/p-313-wiper-electrical-plug.aspx
Pricey.
Mike
Here is a cheaper option. Shipping is $7.50, but still saves a few bucks.
http://www.britishwiring.com/Wiper-Motor-Plug-p/c805.htm?CartID=1
JRL16
05-23-2017, 07:35 PM
I have the plug from ********** on my Mk4. It comes with no way to lock onto the wiper motor. Had to put a tie wrap around it and the motor. If I had to do it over again I would just plug the wires onto the spade terminals in the motor housing and seal it with silicone. Easier and saves some money. If the plug came with a lock on it like all other automotive plugs have it would be worth it
conger
05-28-2017, 10:55 AM
I did that with mine using the insulated spade connectors and potted it with silicone. Then put a connector on the end of the short harness.
michael everson
05-28-2017, 11:01 AM
I do the same as Conger
Mike
phileas_fogg
05-28-2017, 01:16 PM
I did that with mine using the insulated spade connectors and potted it with silicone. Then put a connector on the end of the short harness.
Do you happen to have a picture handy?
Thanks,
John