DadofThree
05-02-2017, 10:12 AM
I have a 95 Bellhousing with my T5, so my driveshaft needs to be a little shorter than standard.
Does anyone have one laying around? Send me a PM
thanks,
Dave
Jeff Kleiner
05-02-2017, 03:20 PM
Dave,
Can't help out with the driveshaft but knowing that you have done some mix-n-match with parts want to confirm that you also have an SN95 T5. You can bolt a Fox configuration T5 to a SN95 bell but the input shaft isn't long enough to engage the pilot bearing.
Jeff
DadofThree
05-02-2017, 04:24 PM
Yes, thank you. It is the T5 that was matched to this bell housing from a Gt95