Coyote Packages

[Chris Canning]

Anyone know if any of the vendors have put together a package for the Coyote engine. I know its on the cards as an option from FFR in the future but is anyone in a position to supply all the misc items or complete drop in package would be preferred at my end?
Thanks
Chris

[CDXXVII]

Spoke with Factory Five about this. There is a package but you still need to find a custom set of headers and a custom oil pan. The package is from Tasca and runs about $16,500. Pretty much talked me out of it.

[oldguy668]

Richard Oben sells the pan, Wayne Presley has the intake tubes, and Astglenn sells the header adapter flanges. The pan, flanges, welding services and intake altogether might add $1,000 to the cost of the engine. I don't see it as a disadvantage that there isn't a single vendor. Each of these products is being sold by a trusted forum member/advertiser. I have no idea what could be in the Tasca package to make it a $7500 upgrade.

[E-Ticket Ride]

Profit!!!!!
Oh, and the Tasca name...

[CDXXVII]

Here is the Tasca Quote that I received for the Coyote.

This is actually for the Hotrod. Hense the custom header and pan for the Roadster

2996

[Richard Oben]

We got our parts from Max at Chapman ford. Engine, transmission, clutch, bellhousing etc for a LOT less than that. JMHO.

We do have the pan available. We have shipped one to Austraila already as apparently no one else makes one yet. HTH, Richard.

[stroked 6t5]

Hello,
Take a look at American Muscle. They will ship a coyote to your shop for $6129.00. Awesome deal.
Regards,
Andy

[jetsbaby]

We got our parts from Max at Chapman ford. Engine, transmission, clutch, bellhousing etc for a LOT less than that. JMHO.

We do have the pan available. We have shipped one to Austraila already as apparently no one else makes one yet. HTH, Richard.


Moroso does make one BUT I don't know if it will work with the F5..It is 6 and 5/8 inches deep so it would be interesting to see if it works..

http://www.americanmuscle.com/moroso-coyote-swap-pan.html

[jetsbaby]

Hello,
Take a look at American Muscle. They will ship a coyote to your shop for $6129.00. Awesome deal.
Regards,
Andy

That is a VERY good deal..I just might have to ditch my Big Block

http://www.americanmuscle.com/coyote-crate-engine.html

[ebh295]

Anyone know if any of the vendors have put together a package for the Coyote engine. I know its on the cards as an option from FFR in the future but is anyone in a position to supply all the misc items or complete drop in package would be preferred at my end?
Thanks
Chris

Hi,

I just came across this today. Some pretty reasonably priced packages.
http://www.gofastquick.com/

Good Luck!

[3kcarbon]

Richard Oben sells the pan, Wayne Presley has the intake tubes, and Astglenn sells the header adapter flanges. The pan, flanges, welding services and intake altogether might add $1,000 to the cost of the engine. I don't see it as a disadvantage that there isn't a single vendor. Each of these products is being sold by a trusted forum member/advertiser. I have no idea what could be in the Tasca package to make it a $7500 upgrade.

Its called markup. Tasca has made themselves a reputation for that allready.

[mike forte]

Hi Chris,
I sell complete turnkey engine kits and have 2 Coyote engine pagages going to Europe right now. I am a WD for all of the components needed to assemble the Coyote engine & TKO-600.
One of the Coyote engines I'm dressing now is getting modeled for A/C & P/S which currently is not made. We'll see how it all comes together.
We are also a forum sponsor and available for tech nites & weekends.
NOTE: I'm an exporter and sell overseas often. Email me with any questions.

Mike Forte
Forte's Parts Connection Inc.
mikeforte302@gmail.com
508 875 0016


Anyone know if any of the vendors have put together a package for the Coyote engine. I know its on the cards as an option from FFR in the future but is anyone in a position to supply all the misc items or complete drop in package would be preferred at my end?
Thanks
Chris

[Benji]

Boost-A-Coyote

COYOTE ALUMINATOR - M-6007-A50SC (http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=12763)

[mike forte]

Hi Benji,
I sell these too!!! Good start with BOOST available for the future.... It's a little down on power without a blower but still a great powerhouse and with the blower, beware!!!!

Mike Forte
Forte's Parts Connection Inc.
mikeforte302@gmail.com
508 875 0016




Boost-A-Coyote

COYOTE ALUMINATOR - M-6007-A50SC (http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=12763)

[David]

I HIGHLY recommend going with the Pan Richard sells, especially if you plan to do any autocrossing or track work. I was going to go with Canton, even sent my stock Coyote pan to have them make one and decided against them since it was only going to be 6 qts. The Champ pan Richard sells is 8 qts like the factiory pan, and appears to have really good oil control as well.

AST Glenn does sell the exhaust flanges I designed and they work really well. Already a number of them installed. I have also heard rumors that FFR is going to be making a header solution as well, so you have a couple options... one available now, or FFR's solution down the road.

I am also working on an AC, PS solution that is nearly complete and will be talking with Jeff Collins about having it mfg. I havent post pictures of it for a reason... as much as I want to share. ;)

David

[GloP]

Anything new to share? I would love more info on the AC, PS solution. Considering putting together a coupe with the coyote.