help for ID aluminum pieces

[frankc5r]

65212

65213 looks like under battery but too small

65214

65215 Is this door latch template or door handle template or are same?

65216 Is this 81030 felted 3/8

Thanks for any help.

[Mechie3]

953: door card inserts?
956: diffuser canards

[Shawn818c]

Frank you got the coupe right? Thinking back to my inventory...

953 looks like the interior door handle template from the street version that used the WRX pull handles, coupes came with interior door handles.

958 is for locating the exterior door handles

[frankc5r]

Yes, I have coupe. Thanks Craig and Shawn. Only
couple more to find.

[Bob_n_Cincy]

It is hard to understand the scale of 955 on your picture. Is it possible you engine belly pan?

65217

Bob

[frankc5r]

It is hard to understand the scale of 955 on your picture. Is it possible you engine belly pan?

65217

Bob
I have the eng belly pan. 955 has minor length of 22 by major of 32 and 11 in high.
Frank

[mikeb75]

960 is the exterior side window gasket for the doors.

953 I verify mechie3, these are the interior door card inserts. You can use them to locate the door pulls - but if you have the padded door cards they will not match the inset perfectly. I had to eyeball it based on reusing the door pull controls from the donor. Revisions to the kit now include different door pull hardware (not from donor) and cables to use instead of the donor pull hardware. Let me know if you need more details.

[frankc5r]

can anyone id this steel bracket. I am thinking it could be an exhaust mount??65362

[Mitch Wright]

That is the throttle pedal mount for the cable actuated throttle.

[frankc5r]

That is the throttle pedal mount for the cable actuated throttle.

Thanks Mitch