Budget friendly pedal box / rear end

[bil1024]

So in preparation for my Gen 3 coupe someday, I obtained the explorer 302 to rebuild and looking for the best donor pedal box and best donor rear with discs, which are the preferred years to use ? Thanks fellas!

[Timb]

Don't know if it's preferred but I can say I used 02 mustang for both

[CraigS]

One advantage of the coupe vs roadster is the much wider fenders. I suspect, although not confirmed, that you could use the 95-98 as is. It is 1.5 in wider but I think 10.5 wheels w/ 315s would still fit.

[R Thomas]

Watching John George's build I noted using the 17 X 9 wheels from his Challenge car he needed 3" spacers behind the wheels to move them out. He's running the 2015 IRS setup so you should be fine.

[HCP 65 COUPE]

You can use an 8.8 from a 94-04 sn95 mustang with stock length axles if you use a 10.5 rim and the right offset(94-04 mustang rear offset). 11in wide wheels will need the shorter fox axles and special caliper brackets or a custom offset.

[HCP 65 COUPE]

The pedal box should come from a 79-93 fox mustang donor or order the wilwood pedal box. Assuming this is still true with the gen 3 coupe.

[bil1024]

Thanks guys for the info