Rear Suspension/ travel limit cable

[fhp1154!]

So I have installed the axle in my MK1, using coil overs and FFR four link bars, the parts included a limit cable but no reference as to where to mount. Any one else using or can advise placement.......thanks in advance!

[blitzkreig baja]

Hey fhp1154,
There is no picture in the manual. It is described in writing. The top is attached where the upper bracket for a quad shock would go and the bottom is attached where the lower shock mount is attached. (I would send a pic, but I am to new here to have that ability yet) Hope this helps.

[steno]

If you have the coilovers, Do you really need the straps?

[CraigS]

Since there are quite a few different coil overs that might be used I won't say this is an absolute but, generally no. The coil overs will limit axle droop travel themselves.

[fhp1154!]

[QUOTE=CraigS;265871]Since there are quite a few different coil overs that might be used I won't say this is an absolute but, generally no. The coil overs will limit axle droop travel themselves.[/QUOT

I'm running coilovers, do I still need the quad shocks ? Thanks everyone for the help!

[CraigS]

Quad shocks have more to do w/ which control arms you have than w/ coil overs. W/ the FFR 4 link arms and their stiffer bushings you will probably be good w/o the quad shocks. The purpose of the quads is to allow aggressive launches w/o wheel hop. I would try w/o them and see how it goes.