My rear struts mount modifications

[oldchevyguy]

Here is what I came up with to reinforce the rear struts mount bracket on the lower control arms of my GTM. I burnt-out the bushing that is unused, and installed a 3 inch long piece of 1.5 x1/4 DOM tubing, with a bracket welded to it. The hole is a little larger (40mm), so it is glued in, and pop riveted in place. I welded the struts bolt nut in place, then gusseted in between. I have a picture, but don't know how to post it. Maybe someone can tell me how. Lol

[SteveE]

Select the insert image icon (4th from the end) hopefully the image is on your computer, select from computer go to the location select it then upload.

hope that helps

[oldchevyguy]

Every time I upload a picture file, I get a message .... upload failed.