DadofThree
11-22-2016, 11:39 AM
I have a set of sn95 1994-1995 spindles and hubs for sale. No ABS ring on these.
In the past, I was going to put a bump steer kit on my build when using these sn95's. I drilled out the lower steering taper into a 5/8" straight through hole. I did this by having the part in vice and, using our mill at work, plunging with a straight 5/8" fluted end mill. The hole is straight. But your tapered ball jointed tie rod end will be loose in this set.
Dust shields in okay condition. 1 lug is bent.
Make a fair offer. Shipping will be added to agreed price.
Thanks,
Dave
(SOLD)
https://c3.staticflickr.com/6/5794/30788837970_14e676baf3.jpg
https://c7.staticflickr.com/6/5723/31120502566_fe47502461.jpg
https://c3.staticflickr.com/6/5671/30788834130_b81893426b.jpg
https://c1.staticflickr.com/6/5805/30788828480_5646b6bc4a.jpg
A couple more photos at https://www.flickr.com/photos/annabellerose/
In the past, I was going to put a bump steer kit on my build when using these sn95's. I drilled out the lower steering taper into a 5/8" straight through hole. I did this by having the part in vice and, using our mill at work, plunging with a straight 5/8" fluted end mill. The hole is straight. But your tapered ball jointed tie rod end will be loose in this set.
Dust shields in okay condition. 1 lug is bent.
Make a fair offer. Shipping will be added to agreed price.
Thanks,
Dave
(SOLD)
https://c3.staticflickr.com/6/5794/30788837970_14e676baf3.jpg
https://c7.staticflickr.com/6/5723/31120502566_fe47502461.jpg
https://c3.staticflickr.com/6/5671/30788834130_b81893426b.jpg
https://c1.staticflickr.com/6/5805/30788828480_5646b6bc4a.jpg
A couple more photos at https://www.flickr.com/photos/annabellerose/