Yrag
11-14-2016, 10:26 AM
Have whitby soft top for cobra...installed soft top and observer that the header bar on soft top seems to just sit on top of windshield with only two side clamps. Only thing that seems to hold it down are two clamps on each side of the top that secure to side of window frame. Am I missing something? Worried that top might blow off in front plus leak. Older whitby top on mark 2.
Problem solved...discovered two flared pin on top enter that slide into top windshield groove to hold center.
Now another problem...door hinges attach to body with three bolts...top hinge on right side door missing the top bolt..door is solid, but would like to put bolt there, problem is no way to get to back of a new bolt for nut.. any ideas?
Problem solved...discovered two flared pin on top enter that slide into top windshield groove to hold center.
Now another problem...door hinges attach to body with three bolts...top hinge on right side door missing the top bolt..door is solid, but would like to put bolt there, problem is no way to get to back of a new bolt for nut.. any ideas?