Can anyone get me a measurement on side pipes??

[Usudno]

I'm looking for a box to ship side pipes in... Would someone be so kind as to measure either

a. the box they came in
b. the actual pipes. I should be able to figure something out from that.


Thanks

[wareaglescott]

Hard to get a super accurate measurement as they are mounted. The length end to end is about 51". The curve from the J pipe to the outer edge you would need about 9". If you were laying them in a box next to each other with the curved ends opposite each other about another 8" length would accommodate the length where the ends don't overlap if that makes sense.
So a box 60' long and about 12-14 wide should work with some room for packing materials.
I threw away the box they came in. However I have 2 other boxes from factory five still and they both are 60 x 14. I suspect this may be the same box they used for the pipes.

[phileas_fogg]

Here's how my Gas-N pipes were shipped:

https://farm5.staticflickr.com/4313/36248778106_4f3e325b9b_k.jpg (https://flic.kr/p/XebsQS)IMG_2769 (https://flic.kr/p/XebsQS) by jhsitton (https://www.flickr.com/photos/91016165@N07/), on Flickr

The box is 57" x 10 1/2" x 25".
The board is 56" x 9 3/4" x 1/2".
The wrapped pipe is approximately 53" x 5 1/2" x 7 1/2"

Cheers,


John