Pictures of vents

[DMC7492]

Hi guys I'm looking for pictures of Zero Decibels louvers in the hood, humps and the rear engine cover.
Finished with paint and installed. Thanks Don

[RM1SepEx]

I only have the hood louvers, this was the first set of the larger size... I requested the increased size.

60362 60363

[Mechie3]

Sorry I didn't get back to your email.

These are the pics I have from my product pages. Most of them are on Chad's former car. He installed most of his on the top of the body work instead of under.

Trunk and Engine Cover
http://zerodecibelmotorsports.com/media/2015/08/Painted-Engine-Vent-1-600x375.jpeg

Fender and original small size hood:
http://zerodecibelmotorsports.com/media/2015/07/Fender-2-600x375.jpg

Non painted medium hood:
http://zerodecibelmotorsports.com/media/2016/01/Hood-open-600x375.png

[idf]

Hi guys I'm looking for pictures of Zero Decibels louvers in the hood, humps and the rear engine cover.
Finished with paint and installed. Thanks Don

Here are my rear hump louvers. 60368

[tmoretta]

Would the engine cover louvers interfere with the FFR convertible top?

[Mechie3]

Yes. They're about an inch too long. Someone requested a shorter version but I didn't get around to it. Seemed like a smaller market. If there's more interest I could do a.small run.

[TouchStone]

I had mine anodized black.

https://c8.staticflickr.com/2/1616/24229678079_cb5219912b_c.jpg (https://flic.kr/p/CV6r9k)

https://c1.staticflickr.com/2/1687/24301910560_de1871b022_c.jpg (https://flic.kr/p/D2tDkW)