View Full Version : MoreauBoys Build Thread
MoreauBoys
10-20-2016, 08:11 PM
Week 1. Got our kit on 12 October 2016. Donor is a 2007 WRX that we got from VCP. Sent all the uncoated parts and aluminum to the PowderCoater and are waiting on their return. Completed inventory and have everything organized, well mostly! Pressed out the spindle bearings and are putting in new bearings and seals. Pressed out all the donor bushings and replaced with new Polyurethane bushings. Hope to start riveting soon.
Shawn818c
10-20-2016, 09:22 PM
Sounds like you're off to an awesome start. Which model 818 did you go with?
AZPete
10-21-2016, 01:04 PM
Welcome! I agree it sounds like a good start, especially with the VCP donor. Who is "we"? I'm always envious of guys who build with a son or father or brother since I've built two FFR cars by myself. You said you'll start riveting, but try to look ahead to see what should be installed before a panel hides it. The manual, for instance , says rivet the panel under the seats but then it's hard to mount the seats. Consider Clecos or #8 screws as temporary rivets.