View Full Version : unpacking boxes / inventory / parts identification
Chef818
10-09-2016, 12:54 AM
Good evening, I am unpacking and doing the inventory of my kit, but as I do this most of the parts have no numbers and the ones that do have a number of the sub group, but no individual numbers. How are you figuring out what is what?
Bob_n_Cincy
10-09-2016, 01:17 AM
Good evening, I am unpacking and doing the inventory of my kit, but as I do this most of the parts have no numbers and the ones that do have a number of the sub group, but no individual numbers. How are you figuring out what is what?
Hey Chef
Welcome to the party.
You must of started with the box of aluminum panels. In the back of the manual there is a picture with all the alum. panels with numbers.
If you have a question on some parts. Post a picture. somebody will respond the same night.
Bob
Chef818
10-09-2016, 10:27 AM
What is this? 59515
mikeb75
10-09-2016, 10:43 AM
Door striker mounts. They mount to the frame and will sandwich the fiberglass side panels and the door strikers you recovered from donor.
Bob_n_Cincy
10-09-2016, 10:44 AM
What is this? 59515
15 minute response
Those are the right and left door striker mounts.
59516
Chef818
10-09-2016, 11:28 PM
Thank you!, but wait there's more
59531595325953359534
Chef818
10-09-2016, 11:32 PM
and these59535595365953759538595395954059541
AZPete
10-09-2016, 11:52 PM
per your IMG numbers:
1741 door hinge stops
1743 rear console cover & parking brake cable mount
1744 hood pin mounts, front
1745 outside mirror mounts
1746 front fender brace
1747 front fender mount, lower
1748 coilover adjusting tool
1749 front wheel well panel, inside
1750 body vent screens & bezels, dash mounts
1753 I have no idea! Not on my 818C!
1754 spacers (for suspension?) and parts for accelerator cable, I think.
mikeb75
10-10-2016, 07:41 AM
confirm 1754 is the split nut & washers for accelerator.
For the spacers, measure them and use where required by build instructions.
Bob_n_Cincy
10-10-2016, 11:44 AM
Number 1753 might be a new designed gas pedal mounting bracket.
Bob
NevaLift2Shift
10-10-2016, 03:54 PM
Number 1753 might be a new designed gas pedal mounting bracket.
Bob
Yep, that's it. I trashed that piece and went with a piece of 2" angled aluminum that I mounted to the firewall and gas pedal. Much sturdier.