Anyone have an extra abs tone ring

[craigfree]

I accidently chipped two teeth on the rear abs tone ring while drilling a hole to slide studs through. Does anyone have a spare tone ring laying around? I can't find them on eBay for less than 80 dollars. I'd happily pay for it.
Thanks

[aquillen]

I accidently chipped two teeth on the rear abs tone ring while drilling a hole to slide studs through. Does anyone have a spare tone ring laying around? I can't find them on eBay for less than 80 dollars. I'd happily pay for it.
Thanks

I have a pair of what is supposed to be 2007 JDM Legacy front axles. ( I say supposed because they were marked "Imprezzza" (sic) by the Cincinnati JDM guys). But from what I could figure out so far, the whole bottom end front and rear suspension I got was really Legacy. Anyway it's this pix. Learning about tone rings here since I'm not using them and ignored the topic. Either look up the info (I'll let you do the research) and/or send me measurements and tooth count. I'll try pressing one off (I assume that is the thing to do) and you can have them. No$. Pay it forward.

Either post your dimensions or pm me.

http://i1078.photobucket.com/albums/w487/aquillen1/818_axle/07%20Legacy%20FR%20CVJ_zps3i1e5xg3.jpg (http://s1078.photobucket.com/user/aquillen1/media/818_axle/07%20Legacy%20FR%20CVJ_zps3i1e5xg3.jpg.html)

[craigfree]

Thanks aquillen, I only need 1 rear. I'm fairly certain any model close in year will work except sti as it has a different wheel flange. The rear just bolts on to the back of the in board side of the wheel flange making you press the bearing out to remove the tone ring.

I'm really hoping someone not running abs has one laying in their scrap pile.

[redfogo]

Take it you need this? 59443

It came off a rear 2002 WRX Hub of I remember right. Its all complete just a little dirty. Shoot me a pm yours for price of shipping.

[craigfree]

Thanks redfogo! Appreciate it.