Sidepipes position sitting low

[AZJoker]

I have a MKII Spec Racer. Once bolted on the J-Pipes, pipes sit lower than the body cut out. Is it possible to bend the J Pipe? Not sure how to fix this problem.

[AZJoker]

Here is an old pic before it went to paint.58606

[Gordon Levy]

Put a jack under the front of the sidepipe, loosen up the J pipe, jack the sidepipe into the position you want it and hammer the J-pipe bolts with an impact gun. It will stay.

[AZJoker]

Put a jack under the front of the sidepipe, loosen up the J pipe, jack the sidepipe into the position you want it and hammer the J-pipe bolts with an impact gun. It will stay.


Thank you Gordon. Will try this