IRS Problem

[dccobra]

First a little background on the car. It's Coupe #090 which I purchase unassembled from a gentleman who ordered it back in 2001 and let it sit in a variety of garages,storage sheds and outside for 10 years. Now for my problem, when I went to assemble the IRS suspension the passenger side had loads of negitive camber I couldn't adjust out. Driver side was fine.Came to realize the upper control arm pivot bracket is welded 5/8" further inboard than drivers side. Any suggestions I'm assuming location the that bracket is pretty critical for proper suspension geometry.

[Hankl]

Contact FFR, they should be able to provide you with a new set of brackets, and the precise location where they should go on the cross tube. A competent welder should be able to do the rest for you.

Hank :cool: