View Full Version : jeep master cylinder too wide?
Ahealey
07-25-2016, 10:08 PM
Hey guys, first post here and i'm working on my pedal assembly right now and ran into a snag :/ I went ahead and mocked up my master cylinder to check things out and it seems like it is a bit too wide? Anyone else have issues with that on a jeep master? Wondering if i should take this back and just get a 94 cobra? I like the looks of the all metal one a bit more though...
Thanks!
michael everson
07-26-2016, 04:01 AM
What do you mean by too wide? Is it interfering with something? There should be plenty of room where that mounts.
Mike
Ahealey
07-26-2016, 08:12 AM
What do you mean by too wide? Is it interfering with something? There should be plenty of room where that mounts.
Mike
It's not interfering with anything but the bolt holes are wider apart than what the pre drilled holes are meant for by maybe 1/4-1/2 of an inch so can only bolt one side in
michael everson
07-26-2016, 11:40 AM
Oh. Haven't heard of that before.