New Spindles

[Bob Cowan]

I have FFR 3691K. I'm using Fox spindles, FFR tubular lower control arms, and kit included SPC upper control arms.

I would like to change to the new spindles, that are supplied with the complete roadster kit. I don' see them in the catalog, can they be purchased seperatly?

Will the spindles, ball joints, and arms that I have work with these spindles?

[Brian Z]

Bob,

The new Mk4 spindles use an alternate upper control arm mounting location on the chassis. You cannot use them on any of the older models. I will post some pictures of the mounting location later on today.

Best regards,

Brian @ FFR

[Brian Z]

The first photo shows the mounting location for the upper control arm using the FFR Mk4 spindles. The older model kits did not have this alternate mounting location.

http://www.factoryfive.com/images/ffforum/newupca.jpg
New style

Here is a picture of a Mk3 upper control arm mount for a standard mustang spindle.

http://www.factoryfive.com/images/ffforum/oldupca.jpg
Old style

Best regards,

Brian @ FFR