Mark Dougherty
06-29-2016, 04:53 AM
Hello All
SOLD Thanks to all for the interest in the car.
Looks like it is staying in Conn.
I helped a customer build this cobra in their garage CT.
It was a blast and it came out great.
Brendan and I just drove it to the LCS. auto crossed it, third place and drove it home.
we just turned over 2,000 miles on it, and going up.
As much as the owner enjoys the car he has decided it is just not his thing.
So onto a new owner.
He would like 40k for it.
Here is a list of the details
FFR complete kit in 2013
Zero donor parts
powder coated chassis
3 link rear suspension
Moser 8.8 rear
FFR front lower arms
FFR front MK4 spindles
FFR aluminum Rad.
dual chrome roll bars
FFR front and rear bumpers and over riders
FFR Wilwood brakes front and rear with whitbys power brake booster
OMG this thing stops.
FFR heater defroster
FFR Halibrand style wheels. 17x9 with 17x10.5 rear Kumo ecsta tires
FFR sun visors
FFR wind wings
FFR Ron Francis chassis harness
ENGINE
Engine Factory 400HP 306
MSD Atomic EFI
March pulleys
Larger coolant tank
Cobra valve covers, and air cleaner
runs as it should.
TRANS
from Hanlon motorsorts
steel flywheel
TKO 500
Hanlon mid mount with reverse lockout style shifter.
Shifts like a t-5 butter baby
Quick time bell housing
ram clutch
cable clutch and is smooth Clutch pedal mod done to clear chassis.
OTHER OPTIONS
reverse lights LED
Cobra Earls thermostat housing
Cobra Earls foot box vents
Marine wiper motors with finish line arms and blades
Finish-line rectangular tail lights.
Sparco seat tracks
Vintage mustang style lap belts
and the FFR safety harnesses
Russ Thompson turn signal
Russ Thompson gas pedal
Whitby side louvers
Kool mat extreme heat insulation
Breeze QA1 single adjustable shocks and springs ( rides awesome )
Breeze wind wing mirrors
Breeze hood hinge
Breeze front mount Battery Box
under hood LED lighting
interior LED lighting
Trunk LED lighting
AC pedal covers
Cobra steering wheel cover
Dougherty Front Rad protection screen
Dougherty large trunk mod
Dougherty Full stainless under car Exhaust ( no burns from the side pipes )
and you can talk to each other while driving the car.
If the under car exhaust is not your thing then I will happily exchange it for FFR side exhaust at no additional charge
Marine water resistant radio CD with marine speakers ( speakers are not great )
PAINT
IT was painted here in PA. and I give the Paint an 9 out of 10
I am critical of paint jobs
60's corvette Daytona Blue
No stripes, No Hood scoop, No side pipes
awesome looking Cobra very OEM looking and driving.
That is the parts
My sons and I assisted him in building this Cobra from the ground up.
We did many custom touches to it to make it a very friendly, and safe driving Cobra.
Big trunk
Rack forward mod to eliminate the twitchy steering
power brakes on the wilwoods makes for tip toe brakes.
interior lighting
center console for the radio and power ports.
This customer has 50% more than his asking price into building this Cobra.
He just has not used it as much as he thought he would.
This Cobra happens to be my wifes favorite out of all the roadsters I have helped build.
already priced to sell and in time for the summer.
Come drive it home.
Ill consider partial trades on a unfinished kit, what do you have?
call me on my cell
717-773-5624
Thanks
Mark D
55544
55545
SOLD Thanks to all for the interest in the car.
Looks like it is staying in Conn.
I helped a customer build this cobra in their garage CT.
It was a blast and it came out great.
Brendan and I just drove it to the LCS. auto crossed it, third place and drove it home.
we just turned over 2,000 miles on it, and going up.
As much as the owner enjoys the car he has decided it is just not his thing.
So onto a new owner.
He would like 40k for it.
Here is a list of the details
FFR complete kit in 2013
Zero donor parts
powder coated chassis
3 link rear suspension
Moser 8.8 rear
FFR front lower arms
FFR front MK4 spindles
FFR aluminum Rad.
dual chrome roll bars
FFR front and rear bumpers and over riders
FFR Wilwood brakes front and rear with whitbys power brake booster
OMG this thing stops.
FFR heater defroster
FFR Halibrand style wheels. 17x9 with 17x10.5 rear Kumo ecsta tires
FFR sun visors
FFR wind wings
FFR Ron Francis chassis harness
ENGINE
Engine Factory 400HP 306
MSD Atomic EFI
March pulleys
Larger coolant tank
Cobra valve covers, and air cleaner
runs as it should.
TRANS
from Hanlon motorsorts
steel flywheel
TKO 500
Hanlon mid mount with reverse lockout style shifter.
Shifts like a t-5 butter baby
Quick time bell housing
ram clutch
cable clutch and is smooth Clutch pedal mod done to clear chassis.
OTHER OPTIONS
reverse lights LED
Cobra Earls thermostat housing
Cobra Earls foot box vents
Marine wiper motors with finish line arms and blades
Finish-line rectangular tail lights.
Sparco seat tracks
Vintage mustang style lap belts
and the FFR safety harnesses
Russ Thompson turn signal
Russ Thompson gas pedal
Whitby side louvers
Kool mat extreme heat insulation
Breeze QA1 single adjustable shocks and springs ( rides awesome )
Breeze wind wing mirrors
Breeze hood hinge
Breeze front mount Battery Box
under hood LED lighting
interior LED lighting
Trunk LED lighting
AC pedal covers
Cobra steering wheel cover
Dougherty Front Rad protection screen
Dougherty large trunk mod
Dougherty Full stainless under car Exhaust ( no burns from the side pipes )
and you can talk to each other while driving the car.
If the under car exhaust is not your thing then I will happily exchange it for FFR side exhaust at no additional charge
Marine water resistant radio CD with marine speakers ( speakers are not great )
PAINT
IT was painted here in PA. and I give the Paint an 9 out of 10
I am critical of paint jobs
60's corvette Daytona Blue
No stripes, No Hood scoop, No side pipes
awesome looking Cobra very OEM looking and driving.
That is the parts
My sons and I assisted him in building this Cobra from the ground up.
We did many custom touches to it to make it a very friendly, and safe driving Cobra.
Big trunk
Rack forward mod to eliminate the twitchy steering
power brakes on the wilwoods makes for tip toe brakes.
interior lighting
center console for the radio and power ports.
This customer has 50% more than his asking price into building this Cobra.
He just has not used it as much as he thought he would.
This Cobra happens to be my wifes favorite out of all the roadsters I have helped build.
already priced to sell and in time for the summer.
Come drive it home.
Ill consider partial trades on a unfinished kit, what do you have?
call me on my cell
717-773-5624
Thanks
Mark D
55544
55545