View Full Version : Remote Oil Filter Kits
Getting close to receiving my engine, and wanted to run a question by everyone. I have the FFR remote oil filter kit, but over the years have heard pros and cons discussed about the quality of the unit. Before I make a mistake that I'll regret, I wanted to find out what peoples experiences were with them, and/or if you can make a recommendation of a higher quality kit.
Thanks in advance for your responses.
Rick
If using a 302/351W and 4x4 headers you don't even need it. Ford Racing also sells a 90* adapter (Call Mike Forte he will know what it is) so that you wouldn't need the remote filter. No hoses, fewer fittings less chance of leaks.
Olli
David Hodgkins
06-14-2016, 05:08 PM
EZ$ don't dismiss Olli's suggestion of the 90 degree adapter. I've used remote oil filters on both my builds but when I do the 3rd it will make use of the adapter. NO hoses. No fittings that leak.
Good advice IMHO.
:)
kevingib
06-14-2016, 05:28 PM
Ford Racing Oil Filter Adapters M-6880-A50
You will find this for about $90-$100 and it will do the trick
steno
06-14-2016, 06:11 PM
Took my FFR stuff off and went with the 90 degree adapter.
Svtfreak
06-14-2016, 07:23 PM
Will the 90* adapter work with the 4-1-4 setup? I have frpp stainless shorties on my 302
steno
06-14-2016, 10:02 PM
Yes
Should have mentioned, I'm building a 289 FIA, so I'll be using shorty headers and John pipes into the FIA side pipes, so I can't use the 90 degree adapter. I know I'll need to use the remote mount, just wanting to go with the one that's the best.
Rick
I have used this Canton part in the past. Shop around for pricing...
https://www.cantonracingproducts.com/product/22-595/22-595----FORDMOPAR-90-DEGREE-ROTATING-REMOTE-FILTER-ADAPTER/
https://www.cantonracingproducts.com/product/22-625/22-625----SBF-REMOTE-BILLET-ALUMINUM-OIL-FILTER-MOUNT/
rich grsc
06-15-2016, 06:44 AM
Should have mentioned, I'm building a 289 FIA, so I'll be using shorty headers and John pipes into the FIA side pipes, so I can't use the 90 degree adapter. I know I'll need to use the remote mount, just wanting to go with the one that's the best.
Rick
I think that if the remote mount fits, the 90* adapter will fit. The remotes will eventually cause problems. Used one once, never again.
mikeinatlanta
06-15-2016, 06:45 AM
Several guys sell a quality adapter. I got mine from Gordon. I would not put the FFR unit on anything as the quality is below what I'm willing to put on my car.
Thanks guys. I will check with Gordon to see if my application will accept a 90 degree adapter. I'd much rather go that way. What you mentioned Mike is what I've been concerned about. I will look at the Canton units if I absolutely have to go that way.
Rick
Leonard
06-20-2016, 04:25 PM
I think that if the remote mount fits, the 90* adapter will fit. The remotes will eventually cause problems. Used one once, never again.
The Canton adapters posted by Olli are a quality piece. I have the pancake adapter on my car. Use good hoses and it won't give you any problem ( I used Jegs pushlock hose and AN fittings). The only catch is if you ever need to remove the pancake adapter the block side o-ring will likely be deformed and need replaced. The o-ring kit is cheap though so I keep one around just in case.