attaching hydrobooster to pedal box

[clancypm]

trying to figure out how I should attach the hydrobooster to my pedal box. My hydrobooster has 3 screws that are attached to it and one open hole. The manual has u attach the pedal box separate from the hydrobooster which doesn't make any sense. The screws that are on the hydrobooster r welded on. I would think that I would use those screws to attach to the pedal box plus one more where there was a screw hole. Anyone have an answer or picture, thanks for ur help. I'm using a 1996 mustang pedal box.

[canuck1]

The hydrobooster attaches to the front of the driver's footbox using an aluminum spacer/adapter supplied by FFR.

The large nut that secures the booster to the factory mounting bracket is used to secure the booster to the FFR adapter, then the adapter is bolted to the footbox in more or less the same fashion as a conventional master cylinder is meant to (other than the bolt pattern orientation).

removal of large nut with FFR supplied tool:

54545

bolted to footbox using FFR supplied adapter/spacer:


http://i32.photobucket.com/albums/d2/seangibbs/passsidehydroboostpushrod-1.jpg

Sean

[clancypm]

thanks Sean I'll have to find the adapter, don't remember seeing it when I did my inventory

[clancypm]

found it thanks again