Any issues with this xxr wheel/tire size setup?

[Ekim7878]

I am looking at the following setup:

17x7 5x100 +35mm xxr 530 (front)
215/40/17 tire

17x8.25 5x100 +35mm xxr 530 (rear)
255/40/17 tire

I am running rear wagon width links. I heard I need to decrease my offset because of this.

I am looking not to scrub anywhere and ensure a good tire fit. Not looking for 235 up front.

Would this setup work?

[wleehendrick]

I am looking at the following setup:

17x7 5x100 +35mm xxr 530 (front)
215/40/17 tire

17x8.25 5x100 +35mm xxr 530 (rear)
255/40/17 tire

I am running rear wagon width links. I heard I need to decrease my offset because of this.

I am looking not to scrub anywhere and ensure a good tire fit. Not looking for 235 up front.

Would this setup work?

I chose the same size XXR wheel and tire sizes that GRM (https://grassrootsmotorsports.com/project-cars/2013-factory-five-818/hot-wheels-818/) did:

Front:
215/40R17 tires on 17x7.0-inch wheels, +35mm offset

Rear:
255/35R18 tires on 18x8.75-inch wheels, +35mm offset

The front fitment is what's recommended by FFR. My donor was an 06 WRX wagon, and I fit the 18x8.75 +35 with 255/35's with adequate clearance, so you should be fine.

[Ekim7878]

I ended up with xxr 530's in gold in the following sizes.
Front:
215/40R17 tires on 17x7.0-inch wheels, +35mm offset

Rear:
255/40R18 tires on 18x8.75-inch wheels, +35mm offset

For tires I went with the Bridgestone re71r.

Here is a picture with them on: https://www.instagram.com/p/BKQfiydjnGR/

I had to use hub centric rings and tuner lugs. Everything fit nicely.