Altenator Bracket for 351w w v-belt setup?

[Brave Salmon]

I am using a stock v-belt setup with a one wire alternator. What are you folks using for the bracket to hold the alternator? I have the vintage air AC bracket on the drivers side and need the alternator on the passenger side right up in front of the valve cover or way down low to miss the down tube of the frame on that side. Obviously, I am not interested in spending another $1000 on a march system with reverse rotation serpentine water pump and all that stuff. maybe later but not right now. I just need the brackets. thanks

[Cobra4GC]

I am using a stock v-belt setup with a one wire alternator. What are you folks using for the bracket to hold the alternator? I have the vintage air AC bracket on the drivers side and need the alternator on the passenger side right up in front of the valve cover or way down low to miss the down tube of the frame on that side. Obviously, I am not interested in spending another $1000 on a march system with reverse rotation serpentine water pump and all that stuff. maybe later but not right now. I just need the brackets. thanks

I am using the Summit Racing Billet Aluminum Alternator Bracket SUM-2003 for 351W. Very easy to install and works great and on.y $69.95

52439

Gary

[68GT500MAN]

I found a nice polished aluminum bracket at Jeggs.
Doug

[Norm B]

I used one from CVF Racing. Here is a link to one for a 351 http://www.cvfracing.com/Ford-351W-Alternator-Bracket-65-68-p/351w-altbrkt-p.htm.

HTH
Norm

[GoDadGo]

You may want to also look at March Performance. They've got all sorts of set ups from super basic to upper end crazy. Good Luck!

[mikeinatlanta]

I procured a piece of 1/2" thick 6061T6, broke out the grinder and made one. Not as tough as it looks.
52498
52499