MK4 Mustang 6406 Power rack question - Need bolts and maybe sleeves.

[Phoenixmsb]

Hello all - Buying parts while waiting on my MK 4 kit. I'm doing a no donor build and am in the middle of buying parts. I just purchased a #6406 Autozone power rack and it came with the rubber bushings. My question - I don't have any bolts, washers or sleeves. What size do I purchase (Grade 8 for sure) or where do you recommend I purchase them from?


Thanks
:cool:

[NukeMMC]

The kit will have the fasteners, but for best results with the rack install, get a set of Breeze rack bushings (http://www.breezeautomotive.com/details.php?prod_id=720&cat_id=12). While you're at it, get the rack fitting kit (http://www.breezeautomotive.com/details.php?prod_id=646&cat_id=12) to hook the -an hoses to.

[Phoenixmsb]

Perfect - didn't know about the fasteners. I ordered the Breeze bushings and the AN adapters for the rack and the power steering pump with high pressure braided line and end fittings.

Thanks for the reply!

Bruce
:cool:

[carlewms]

Please check the rack from AutoZone if you meant to get the 3 turns lock to lock version. I went through 3 racks from AZ before finally giving up and getting Breeze's rack. The problem I found is the store could simply not guarantee that the stock number would be the 3 turns lock to lock version. Additionally the paint was scrapped off each of the one's I actually took home and one had a collapsed hydraulic line.

After that frustration I ended up with the Breeze rack which came from Unisteer. It had the extenders and larger bellows installed.

For more information please check out my build thread ... http://thefactoryfiveforum.com/showthread.php?9583-Carl-s-Mk-4-Roadster-Build.

Thanks,

Carl