View Full Version : Led flasher?
nkw8181
03-24-2016, 11:19 PM
How is everyone wiring in the led flasher?
Bob_n_Cincy
03-25-2016, 04:01 AM
How is everyone wiring in the led flasher?
I went traditional.
red is brake, run and turn. I will switch this to LED.
The small white tail is reverse only with a standard bulb.
Bob
Edit: Sorry it was early AM, I didn't read the question correctly.
K3LAG
03-25-2016, 08:02 AM
I found the two blades on the flasher would plug into the original connector then just attached the black pigtail to one of my harness to chassis ground screws.
Larry
Pearldrummer7
03-25-2016, 10:45 AM
I found the two blades on the flasher would plug into the original connector then just attached the black pigtail to one of my harness to chassis ground screws.
Larry
Same here. It works well from my experience
nkw8181
03-26-2016, 08:05 AM
Thx, I didn't want to chase down the stock flasher so just bought a version that goes in line and got it to work.