Chassis Lubrication Questions! >>-----> What Grease Works Bests?

[GoDadGo]

Hey Gang,

1. I could use all your input so please give me your collective advice.
2. I've greased the ball joints and tie rods with a good name brand chassis grease.
3. My question is should I use a different grease for the bushings on the A-Arms and rear Control Arms?
4. Can a petroleum based grease be used on the polyurethane bushings or will this type of grease deteriorate them?
5. Again, Please Give Me Your Comments Since I'll Be Go-Karting Fairly Soon!

Steve aka: GoDadGo

[edwardb]

I don't think there's anything exotic needed here. I've been using Red Line Oil 80402 Synthetic CV-2 Grease. Comes in a 14 oz tube. For all the locations you mention. From our local O'Reily's or Advance. Don't remember which.

[GoDadGo]

I don't think there's anything exotic needed here. I've been using Red Line Oil 80402 Synthetic CV-2 Grease. Comes in a 14 oz tube. For all the locations you mention. From our local O'Reily's or Advance. Don't remember which.

Thank You! I've only got about 7-10 more days before my engine comes back so I'm buttoning up the small stuff. Thanks Again!