quick jack holes

[chopthebass]

What are my options for hiding the holes once my QJ tubes are in? I have the Mk4 with the once-piece front tube. I could source a big grommet, but wondering if there are purpose made solutions.

Thanks!

[MPTech]

This is what I did, happy with the results.
Got all the parts from **********.


MK4 front bumper bolts / grommets (http://www.ffcars.com/forums/17-factory-five-roadsters/302516-mk4-front-bumper-bolts-grommets.html)

[GoDadGo]

I found some grommets at Finish Line Accessories. They have different ones for the front versus the rear. Can't hurt to look at them.

[edwardb]

The link MPTech posted has a lot of information about how to finish the quick jack openings including use of the ********** grommets. I was part of that discussion and also posted pictures of my completed Mk3. Since then Mk4 #7750 was finished, this time with overriders instead of quick jacks. Pictured below. Both did use the ********** grommets again. They really work very well and are perfect in this application. Note though that the ********** grommet holes are 3/4 inch. So the stock FF tubes at 5/8 inch OD will leave a gap. Some use them this way and it's OK. But if you want to fill them completely, ********** also sells 3/4 inch OK tubing.

http://i867.photobucket.com/albums/ab234/edwardb123/Factory%20Five%20Mark%204%20Roadster%20Build/Final%20Assembly/IMG_2847_zps79ed5114.jpg (http://s867.photobucket.com/user/edwardb123/media/Factory%20Five%20Mark%204%20Roadster%20Build/Final%20Assembly/IMG_2847_zps79ed5114.jpg.html)