Mustang Light switch

[RichS]

Has anyone used a different switch for lights other then the donor mustang one ? And also the wiring diagram for crossing over from donor harness . Thinking some sort of three toggle switch ?

[AC Bill]

Lots of fellows have used switches other than the Mustang donor one.
Toggle switch would work fine too. An Off-On-On could be used for low and high beam. Need a relay though, unless it is a high capacity switch, as there is quite a few amps passing through it.

[Bob Cowan]

I use a standard hot rod type pull switch for the lights, including a rheostat for the dash lights. Just like an old Mustang. And I use the supplied ON-ON toggle switch for the dimmer. It's simple, inexpensive, and reliable. Did the same thing on my Eexocet.