Some more what are these pieces for a coupe

[Newkitguy]

Hey guys anyone able to help identify these pieces that came out of box 9 4997949980

[Newkitguy]

Just the aluminum pieces and what is exactly what here

[ben1272]

At least one of those looks like the cockpit close off panel behind the head rests?

[Newkitguy]

That was the one I think I've identified lol

[07FIREBLADE]

One is the block off for the glass. Headliner aluminum is the largest thinnest piece. The 2 long thin pieces might have something to do with the door/window seal. I got 4 in my order.

[SnyderJD]

Hmm. I have the one for the headliner and what looks like to be the piece for the glass in the firewall. But I don't have the others at all in my packaging? that being said, I have panels and mesh for the non coupe variation as well, which is frustrating when trying to figure out what you need and what you don't.

[lance corsi]

Hey guys anyone able to help identify these pieces that came out of box 9 4997949980

Okay, I'll try again! The large funny looking piece on the far left is your roof headliner insert. (Fits between the air duct built into the top). On the far right is your rear bulkhead panel that holds the rear bulkhead glass. Hard to tell on the others from the pic.

[lance corsi]

Hmm. I have the one for the headliner and what looks like to be the piece for the glass in the firewall. But I don't have the others at all in my packaging? that being said, I have panels and mesh for the non coupe variation as well, which is frustrating when trying to figure out what you need and what you don't.

I agree with others on the large pieces, but the other pieces look foreign to me too! I don't think I received the smaller pieces with my kit either.

[Newkitguy]

Yeah I have aluminum panels that I'm not sure if they go to this car at all. All of our body aluminum in box 6 starts with "80xxx" I have panels that start with 81xxx. Unless the new nose pieces have different numbers than my packing list....

[lance corsi]

Yeah I have aluminum panels that I'm not sure if they go to this car at all. All of our body aluminum in box 6 starts with "80xxx" I have panels that start with 81xxx. Unless the new nose pieces have different numbers than my packing list....

Yea, FFR sent me most of the aluminum panels for the s model also. Can't use any of them. Fortunately, Bobncincy is close to me and he can use them, so they won't go to waste. It took me a while to find a home for every panel, but with the help of the manual & staring for awhile at them, I did manage. It is quite confusing when they ship parts that don't go with your model!

[Newkitguy]

Yeah and with the new nose and coupe not having very many photos applicable in this manual....we need a revision!

[redfogo]

Hmm. I have the one for the headliner and what looks like to be the piece for the glass in the firewall. But I don't have the others at all in my packaging? that being said, I have panels and mesh for the non coupe variation as well, which is frustrating when trying to figure out what you need and what you don't.

Hmm I also have all the things you got, we got our kits around the same time though. I wonder what else is missing...

[SnyderJD]

Redfogo, so you dont have the two smaller pieces either?

[redfogo]

Redfogo, so you dont have the two smaller pieces either?

I dont' have that or the long sock with the oval in it. Out of those pics I just have the rear window and the headliner...

Any ideas what we do about this kinda stuff, because none of this is on my checklist I believe. So I have no idea if I will get it or not.

[SnyderJD]

I think until we get a build manual to cover the coupe portion its tough, it's tough. For those that have build previous versions of the 818, they have a better idea. for those of us that have not, we are sort of guessing...

I know that the guys at factory five will do whatever to make sure he the right parts at the end of the day. just a struggle to figure out whats missing, if it's not even on your inventory or why we have inventory for parts that are not for our version of the 818.

[Newkitguy]

Alright guys courtnie hooked me up with the info on what these pieces are, the skinny pieces go inside the door at the top where the window will pass through and the weird curved piece is actually a template for the door handle. 50053but it goes underneath he is just showing on top for a visual. And then 50056 courtnie has been great helping me granted she is my sales person but she has been getting answers from the right people for me

[redfogo]

I also called today I was told the manual might go into printing by end of the week. Should answer a lot of our questions!

[SnyderJD]

What were the part numbers for the door template and the window portion? I don't have those nor do I have them as items not shipped on my inventory sheet.

[Newkitguy]

No part numbers written on them or on my sheet

[07FIREBLADE]

When I get home today I will check my sheet. I believe that the part numbers are on my sheet. If anyone needs some of the door window piece I have 2 extra ones just cover the shipping cost and they are yours. Hopefully the manual comes out this week or they could provided a downloadable revision.

[lance corsi]

I didn't get any of those parts either. I don't even know what I'm missing until I see something here. Lately I've given up on the smalls and just made everything I needed. I've looked thru everything numerous times, so I know wat is here. I just don't know what isn't!

[SnyderJD]

I've emailed one of the guys at F5R and asked how do we know if we are missing stuff. There seems to be a difference in basic components that some of some people have gotten and some have not. I'll let everyone know what I hear. Fireblade, those parts #'s would be great as I may call tomorrow and use those as an example. Hopefully the manual helps out when it is finally released.

[07FIREBLADE]

Door window inside trim - #81092

Thats actually the only part number I could find. The door handle trim for the cutout is not on my list nor is there a part number on the sheet.

[Courtnie Provencher]

If you guys have questions about part numbers for the aluminum pieces and where they go feel free to shoot me an email. I''ll help identify each one for you.