Has anyone tried the SSBC A0730 Proportioning Valve with Wilwood master cylinders?

[RRussellTx]

Looks like a nice piece and would add some flexibility in the brake setup with a bonus brake light switch...

http://www.amazon.com/gp/product/B003EP2Z38?keywords=Brake%20a0730&qid=1452822677&ref_=sr_1_2&sr=8-2#productDetails

[CraigS]

If you have dual MCs w/ an adjustable balance bar why would you need a valve?

[RRussellTx]

I was looking for a brake light pressure switch and came accross this. I thought this might be an easier and more accurate adjustment than the mechanical balance bar so I thought I would throw it out there and see if anyone has tried it out.

[CraigS]

My experience w/ my CNC dual MC is that the adjustment is in very fine increments using the remote adjuster from Forte. I expect that the Wilwood is the same.

[walt mckenna]

I agree with Rich when he says "less rear braking is the last thing these cars need". If anything, we should be talking about how to make the rears do more of the work.