single wiper

[insurance guy]

I recall seeing a thread with installation of a single windshield wiper. I have been unable to relocate the thread. Can anyone help me find it?

[redfogo]

This one? http://thefactoryfiveforum.com/showthread.php?12644-windshield-wipers-818-s

I have a few other helpful links on my site if you ever need them. Trying to build it with as many helpful links as I can for everyone any other links feel free to let me know!
http://redfogo.com/index.php/helpful-links/

[Samiam1017]

Hendow posted this one a while back never looked to see if he has any write ups about it but imo its the best one ive seen

https://www.youtube.com/watch?v=uiW79IYj2qU&feature=youtu.be

[STiPWRD]

Here are some more single wiper links:

Lumpyguy
http://thefactoryfiveforum.com/showthread.php?16437-Lumpyguys-818S-build&p=222064&viewfull=1#post222064

Bob
http://thefactoryfiveforum.com/showthread.php?12534-MRG-MotorSports-818S-Build&p=211202&viewfull=1#post211202

[Bob_n_Cincy]

Here is my video, No hood trimming needed.


https://youtu.be/U-HMdbagCuE

[RM1SepEx]

Erik Treves did one too, the Flash thread for his...

[Harley818]

Thought I would post my windshield wiper mounting. I didn't need any hood trimming either.
I took Lumpyguys arrangement and fine tuned it a bit. Works awesome.

56146561475614856149

[Hindsight]

Here is mine. I basically copied Harley, though my attachments are a little different. I used the stock driver's arm. RainX wiper. Raised the rear of the hood using custom brackets that could be removed. Didn't have to cut the hood. Wiper arm came within 1/16" of the remote brake fluid reservoir.... I used the brackets to locate it as low as possible to keep the hood as low as possible. Also note the hood support I added in front to help raise the hood in the middle for wiper arm clearance.

http://i.imgur.com/aF9uwr7h.jpg

http://i.imgur.com/wBGrgHth.jpg

[STiPWRD]

I copied insurance guy:
561525615356154
It involved making a small bracket and using the motor that Bob originally posted. I like the simplicity.

[dougkirkbride]

Anyone try to pass inspection with this? in ohio you are allowed manual wipers, I might give it a try.

56251

[DMC7492]

Hi guys I am fitting the hood to the fenders. For a single wiper what is the minimum height from windshield to the hood?this is what I have now but would like to lower a bit!
58124

[RM1SepEx]

Hi guys I am fitting the hood to the fenders. For a single wiper what is the minimum height from windshield to the hood?this is what I have now but would like to lower a bit!
58124

you have plenty of clearance, I cut the return on the back edge of the hood and added a support with a rubber stopper in the center of the hood.

[AZPete]

Most of us with one wiper have made a hood prop that you can adjust after you get the wiper arm mounted, thus avoiding cutting the hood. You are showing about 2.25" and that's more than I have with my single arm wiper using the donor mechanism and donor arm.

58125