Ordering wheels, need mesurements.

[Paquette173]

Hey guys, i will be ordering Forgeline 18'' wheels.

Any of you guys with MK4 with wilwood front brakes and the 2015 IRS wilwood 12.88 brakes ?

I need the mesure of 3-4-5-6 of front and rear.
http://www.forgeline.com/wheel_fitment.php

I was thinking the same size and offset as FFR. I will be tracking the car, think they will rub up front ? they seem to be agressif.

18x9 +24
18x11+12

thanks !!

[edwardb]

I have the combination you're describing under construction. I believe these are reasonably accurate measurements:

Front:
3 = .78"
4 = 7.25"
5 = 2.78"
6 = .45" (plus usual Ford dust cap)

Rear:
3 = .28"
4 = 7.25"
5 = 2.78"
6 = .43" (plus slightly more at center where end of CV axle protrudes)

I'm using the FFR 18" Halibrand style replica wheels. The brakes easily clear the wheels.

http://i867.photobucket.com/albums/ab234/edwardb123/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Brakes/IMG_3680_zpsf6smh9px.jpg (http://s867.photobucket.com/user/edwardb123/media/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Brakes/IMG_3680_zpsf6smh9px.jpg.html)

http://i867.photobucket.com/albums/ab234/edwardb123/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Brakes/IMG_3730_zpsdhh71fzj.jpg (http://s867.photobucket.com/user/edwardb123/media/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Brakes/IMG_3730_zpsdhh71fzj.jpg.html)

[Paquette173]

Wow thanks for the really fast response !!

Can you do one last thing, the bolt threads for the lugs nuts ? Thanks

[edwardb]

Wow thanks for the really fast response !!

Can you do one last thing, the bolt threads for the lugs nuts ? Thanks

You're welcome of course. The front hubs supplied by FFR are 1/2-20 RH out of the box. The 2015 Mustang IRS hubs are something else (not sure what size...) but FFR supplies a new set of 1/2-20 RH studs to replace them.