Oil Pan for '33 with 351w and Power Steering

[Gsnipe]

Hello,
I am in the process of putting a 351W (408) into my '33 and I have read several threads about that engine not fitting in smoothly with the Electra-steer power steering unit which causes owners to replace or use a BFH on their current oil pan. Can you tell me what oil pan would work best for this application please? I don't want to lose PS or use the BFH if I don't have to.

Thanks,
Brandon

[stack]

think you need a rear sump pan. i have seen a BFH used on a stock pan. not that much clearance ic needed

stack

[sturigus83]

Gsnipe When I start my build I am also going to use a 351W. Have you had any problems in mounting the engine into the frame. One guy told me that the 351W would be to tall for the hood and I dont know. I am going with the old school look. Also what transmission are you going to use. Where are you located,I am in south east Georgia. Thanks