For Sale 94 SN 95 spindles and 04 brakes

[gtaroger]

I have 1994 SN95 spindles that have been cleaned,painted and clearanced to fit the 2004 PBR calipers.I also have new loaded PBR two puck calipers and brackets,SS braided brake lines,new 11 inch rotors,Team Z bump steer kit,banjo bolts,The four hole FFR bracket to mount the spindles to the FFR car.The only thing thats not new is the hubs.This is the complete setup for your FFR car or fox less the washers for the lower ball joints.I have been putting together this setup for my MKII. I just found out the calipers will not fit the old PSE wheels on my car. So I'm selling everything and going a new route. I have over $750 in the setup. I'll take the first $500 OBO plus shipping. Roger Sold

[gtaroger]

Price lowered to $500

[Mike N]

Roger.

I ran that same spindle / brake set up with my PSE wheels and needed to use a 1/4" spacer and lightly sand the raised lip on the back side of the openings in the wheels. If you have the 1/4" additional fender clearance available you should be able to make it work.

[gtaroger]

Thanks Mike. I don't have enough space in the fender lip to move the wheel out .My wheels fit very tight as they are now.Roger

[gtaroger]

Thanks Ken! Sold