Transmission mount

[R8er]

I have a T5-z transmission. I ordered a T5 transmission mount for it which should be exactly the same but the mounting points on the tranny are much wider than the mount. Did I just get the wrong thing or am I missing something?

[michael everson]

Flip it over
Mike

[R8er]

Ha I wish that was the solution! No, the widest bolt holes are still an inch short on both sides.

[otto halstead]

The way you have it in the photos is upside down, the narrow set of threaded holes should be facing the ground and the wider slotted holes should be facing up towards the trans. If they won't match the mounting holes on the trans then you may have the wrong part.