john g
10-26-2015, 06:40 PM
I purchased the wood steering wheel pictured below largely because of its size--14 inches (365mm), the same size as the stock WRX wheel. It is also from NRG, so the horn button logo matches that on my NRG seats. My wife and sons do not think the classic wood wheel is a good match for the modern, sleek 818, and they suggest I change it.
I see my choices as:
1. Stay with the wood wheel.
2. Cover the wood wheel with a black leather cover. This way, I would have a large wheel with the NRG logo, but in a matching color.
3. Pony up for the FFR 12 inch wheel.
By the way, I am using the FFR hub adapter. It fits over the Subaru clockwork connector so that (i) the horn can be wired in easily and (ii) the turn signal cancel works. I did need to do some trimming for the clockwork connector to make it fit.
46907
I see my choices as:
1. Stay with the wood wheel.
2. Cover the wood wheel with a black leather cover. This way, I would have a large wheel with the NRG logo, but in a matching color.
3. Pony up for the FFR 12 inch wheel.
By the way, I am using the FFR hub adapter. It fits over the Subaru clockwork connector so that (i) the horn can be wired in easily and (ii) the turn signal cancel works. I did need to do some trimming for the clockwork connector to make it fit.
46907