michael everson
10-06-2015, 04:53 AM
Professionally built FFR 818 for sale. Kit number 33
base kit with the following FFR options
Powder coated frame
steering wheel
padded dash and door panels
harness bar
front and rear carbon pieces
windshield wiper kit
trunk insert
Donor:
2002 WRX with app 120,000 miles
All parts were cleaned or replaced if damaged.
engine was cleaned and replaced timing belt, and all gaskets
trans was painted and works perfectly.
all four suspension corners were replaced with 2004 STI units.
Car has special built DSS CV axles to adapt the trans to the STI knuckles
Brakes:
STI Brembo black calipers and rotors
4 piston front
2 piston rear.
New rotors
stainless brake flex lines
Suspension:
Subaru aluminum front control arms
STI knuckles
Aluminum rear lower control arms
adjustable links
interior:
Fully carpeted and insulated interior.
one off console to house the radio and switches
Corbeau racing seats on semi adjustable bases
4 point harnesses
E-Stopp electric parking brake (no visible handle)
radio with 4 speakers
Waynes custom billet shifter
stock gauges
Cooling:
aluminum radiator with shroud and dual cooling fans
cooling tubes front and rear
cooling fan over ride switch
waynes cooling mod.
Exhaust:
3 inch stainless system with cat. Comes straight out the back.
Wiring:
Car was wired using a Painless 12 circuit wiring harness to handle everything
except the engine. No more bulky factory fuse boxes
engine was wired by harvesting the engine only wiring from the donor harness.
I then integrated the 2 together. Everything works as it should.
I am sure I am forgetting a bunch of stuff.
Car is currently registered and driving with no issues. However it does have a rejection stick and am currently going through the MAC center to get a good sticker. It has been over 2 months since I brought it there and they still have not issued an OK to get a sticker.
Pictures can be seen here of the build.
http://thefactoryfiveforum.com/showthread.php?11400-Replicaparts-com-818-build-thread&highlight=replicaparts.com
Asking $20,000.00 FIRM. You cannot build on for this price.
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/936E8DE1-15F1-4F01-9FBC-292FC7872053_zpsgjnucy0d.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/936E8DE1-15F1-4F01-9FBC-292FC7872053_zpsgjnucy0d.jpg.html)
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/D82155BE-7AFA-4E2D-BF0C-43DF0C0C14CC_zps4lmw6tq3.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/D82155BE-7AFA-4E2D-BF0C-43DF0C0C14CC_zps4lmw6tq3.jpg.html)
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/2B101D84-30A0-494E-B61E-F8FC0C28F5B2_zpswgdbrbim.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/2B101D84-30A0-494E-B61E-F8FC0C28F5B2_zpswgdbrbim.jpg.html)
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/85464D8F-2208-463D-AA98-AA4452920504_zpsnrlccktk.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/85464D8F-2208-463D-AA98-AA4452920504_zpsnrlccktk.jpg.html)
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/205156B5-53A8-41E6-A07D-06E55589E718_zpserew7psz.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/205156B5-53A8-41E6-A07D-06E55589E718_zpserew7psz.jpg.html)
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/386A1158-6595-4125-BE1B-30A05B416A0F_zps6mr0ae9y.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/386A1158-6595-4125-BE1B-30A05B416A0F_zps6mr0ae9y.jpg.html)
base kit with the following FFR options
Powder coated frame
steering wheel
padded dash and door panels
harness bar
front and rear carbon pieces
windshield wiper kit
trunk insert
Donor:
2002 WRX with app 120,000 miles
All parts were cleaned or replaced if damaged.
engine was cleaned and replaced timing belt, and all gaskets
trans was painted and works perfectly.
all four suspension corners were replaced with 2004 STI units.
Car has special built DSS CV axles to adapt the trans to the STI knuckles
Brakes:
STI Brembo black calipers and rotors
4 piston front
2 piston rear.
New rotors
stainless brake flex lines
Suspension:
Subaru aluminum front control arms
STI knuckles
Aluminum rear lower control arms
adjustable links
interior:
Fully carpeted and insulated interior.
one off console to house the radio and switches
Corbeau racing seats on semi adjustable bases
4 point harnesses
E-Stopp electric parking brake (no visible handle)
radio with 4 speakers
Waynes custom billet shifter
stock gauges
Cooling:
aluminum radiator with shroud and dual cooling fans
cooling tubes front and rear
cooling fan over ride switch
waynes cooling mod.
Exhaust:
3 inch stainless system with cat. Comes straight out the back.
Wiring:
Car was wired using a Painless 12 circuit wiring harness to handle everything
except the engine. No more bulky factory fuse boxes
engine was wired by harvesting the engine only wiring from the donor harness.
I then integrated the 2 together. Everything works as it should.
I am sure I am forgetting a bunch of stuff.
Car is currently registered and driving with no issues. However it does have a rejection stick and am currently going through the MAC center to get a good sticker. It has been over 2 months since I brought it there and they still have not issued an OK to get a sticker.
Pictures can be seen here of the build.
http://thefactoryfiveforum.com/showthread.php?11400-Replicaparts-com-818-build-thread&highlight=replicaparts.com
Asking $20,000.00 FIRM. You cannot build on for this price.
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/936E8DE1-15F1-4F01-9FBC-292FC7872053_zpsgjnucy0d.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/936E8DE1-15F1-4F01-9FBC-292FC7872053_zpsgjnucy0d.jpg.html)
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/D82155BE-7AFA-4E2D-BF0C-43DF0C0C14CC_zps4lmw6tq3.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/D82155BE-7AFA-4E2D-BF0C-43DF0C0C14CC_zps4lmw6tq3.jpg.html)
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/2B101D84-30A0-494E-B61E-F8FC0C28F5B2_zpswgdbrbim.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/2B101D84-30A0-494E-B61E-F8FC0C28F5B2_zpswgdbrbim.jpg.html)
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/85464D8F-2208-463D-AA98-AA4452920504_zpsnrlccktk.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/85464D8F-2208-463D-AA98-AA4452920504_zpsnrlccktk.jpg.html)
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/205156B5-53A8-41E6-A07D-06E55589E718_zpserew7psz.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/205156B5-53A8-41E6-A07D-06E55589E718_zpserew7psz.jpg.html)
http://i151.photobucket.com/albums/s140/michaeleverson/Mobile%20Uploads/2015-10/386A1158-6595-4125-BE1B-30A05B416A0F_zps6mr0ae9y.jpg (http://s151.photobucket.com/user/michaeleverson/media/Mobile%20Uploads/2015-10/386A1158-6595-4125-BE1B-30A05B416A0F_zps6mr0ae9y.jpg.html)