karlos
10-03-2015, 11:54 AM
I'm looking to add a firewall mounted clutch cable adjuster to replace the fixed spacer that came with my kit. Anybody know if this McLeod adjuster (link below) will work with the FFR supplied clutch cable? Suggested alternatives welcome as well. Thanks!
http://www.summitracing.com/parts/mcl-1735
46272
Svtfreak
10-03-2015, 05:54 PM
What motor you using?
I have a older style UPR adjuster on mine with 5.0 and T5 and while it was very close to get both screws in that hold it in place, it works. I checked UPR site and don't see it any longer but I see the new ones have 4 bolts. It should still work but one bolt may have to be left out (picturing in my head atm). Leaving one bolt out is ok. Heck, the original firewall adjusters only have one sheet metal screw holding the body in. Man, I remember when those things came out how nice it was not to have to get under car to adjust the cable any longer.