Turn signal lights and seat frames

[durk]

I could use some help with my front turn signal lights as they are not like the rears in that they look cheap they are made cheaply and the chrome does not fit flush with the body, is it possible to get lights like the rear ones with an amber lens. Also a heads-up on the seats when I took mine out of the sealed plastic bags I noticed that the frames are rusting and are not coated I removed all the upholstery and the foam was rusted to the frames. I contacted FFR and they said that some surfacing rust is normal. (RUST NEVER SLEEPS) So if you have your seats still in the box you might want to take a peek mine were in the box since Christmas. Also just so you know this car may get wet. These are the seats that come from England Big and Tall

[Avalanche325]

...... the chrome does not fit flush with the body. One thing a few guys have done is to put an O-ring behind the chrome. That makes it look like it has a gasket.

As far as looking cheap and being cheaply made. Well, they are replicas of a Lucas part. I don't agree with you on that one. That is what front turn signal lights on a Cobra look like.

[DaleG]

4590745908An alternative, if you really don't like the looks of the supplied lights:

http://www.**********accessories.com/p-282-marker-lights-l488.aspx With these, though, you will need to wire them yourself with bullet-connectors. Here's a pic installed:

[durk]

Thanks a lot their L692 lights are the same as the rear lights but in amber these are some nice lights and they match the rears THANKS AGAIN