Slight rub in rear, spacers?

[Pearldrummer7]

I have RPF1's in 5x100, 17x9 + 35 flair, and they rub Wayne's lower arms the tiniest bit. (255 Direzza Z2 star spec tires) It's worn the powdercoat right off and a small amount of the tire's face off.

I was thinking of running small spacers to ensure they don't (link (http://www.amazon.com/5x100-Hubcentric-Spacers-Subaru-Impreza/dp/B00A7I2SU0)) rub any more.

My question is 2 part:
-Is this alright on stock studs? I figure 3mm is probably okay, but maybe that's pushing the limits of the stock studs.
-Is there another way to get more clearance that I'm not thinking of? I can't find a light wheel with less offset in that size.

[Bob_n_Cincy]

I have RPF1's in 5x100, 17x9 + 35 flair, and they rub Wayne's lower arms the tiniest bit. (255 Direzza Z2 star spec tires) It's worn the powdercoat right off and a small amount of the tire's face off.

I was thinking of running small spacers to ensure they don't (link (http://www.amazon.com/5x100-Hubcentric-Spacers-Subaru-Impreza/dp/B00A7I2SU0)) rub any more.

My question is 2 part:
-Is this alright on stock studs? I figure 3mm is probably okay, but maybe that's pushing the limits of the stock studs.
-Is there another way to get more clearance that I'm not thinking of? I can't find a light wheel with less offset in that size.

Frank,
have you modified spacers to move the front of the lower trailing arm toward the center of the car?
Bob

[Pearldrummer7]

Frank,
have you modified spacers to move the front of the lower trailing arm toward the center of the car?
Bob

Yes I have. The rub is slightly worse on one side than the other. It barely rubs, but it definitely does.