Fuel pump wiring stupid question

[fubar94]

OK I have made some nice progress, but when I get to the solder the green fuel pump wires to the back of the fuse panel, I get stumped on where the green fuel pump wires are in the Coyote harness. Are they in the 16 pin Inline section of the Coyote harness?

Thanks for the help.

[H R Lucky]

Fubar,
Fuel pump wire is the Dark Green wire (Blunt lead #2) listed in the Ford Controls Pack instructions. Connector #C47 Inline connector to Blunt Leads Pigtail (yes this is a 16 pin connector). It turns on if all of the other conditions are met when the ignition is turned on. Just connect the Dark Green wire to the positive side of the fuel pump and the negative side to Ground.

[fubar94]

Fubar,
Fuel pump wire is the Dark Green wire (Blunt lead #2) listed in the Ford Controls Pack instructions. Connector #C47 Inline connector to Blunt Leads Pigtail (yes this is a 16 pin connector). It turns on if all of the other conditions are met when the ignition is turned on. Just connect the Dark Green wire to the positive side of the fuel pump and the negative side to Ground.

My kit, did not come with the (Blunt lead #2) so it was hard to find the dark green wires.

Thanks for the confirmation.