transmission tunnel

[insurance guy]

Did anyone else have trouble with transmission tunnel?
no issue if I install it without the rear firewall
with the rear firewall in place I am unable to get it all the way to floor. Any suggestions before my files and grinders comes out?
Maybe some pics of your installation

thanks

[Pearldrummer7]

I hacked everything up to make it work. Grab that angle grinder!

[Frank818]

I had a LOT of troubles with the tunnel cover, I had to trim it virtually everywhere and every corner and yes it seems a little too long to fit with rear FW. I haven't done the trimming yet but that will be my solution. Trimming is what I do for a living on this build. :)

[suttonb3]

I also performed a lot of surgery to get everything to fit.

[R.Spec]

I test fit an am going to have to trim a lot as well.

[RM1SepEx]

I hacked and replaced almost everything, it is in progress and about 2.5 inches taller.

I think I should have just cut it out and installed my own, cleaner. I don't need all the space with the iWire harness