Fender Vents, Zero Decibel Motorsports

[Mechie3]

Zero Decibel Motorsports Fender Vents
http://zerodecibelmotorsports.com/products/front-fender-vents/


http://zerodecibelmotorsports.com/media/2015/07/Fender-2-600x375.jpg
C. Plavan's 818R with fender vents and small hood louvers

What:
Aluminum louver panel for the top of the front fenders.

Why:
Improve pressure differential across the front end of the car and reduce front end lift caused by high pressure in the wheel well.

Cost:
$45

Shipping
Parts will ship flat and be quoted based on buyers zip code.

Includes
2 Laser cut aluminum louver panels.

http://i.imgur.com/8lzVKyo.jpg

[Tamra]

Those look nice!

[Pearldrummer7]

Sign me up! Unless you're doing a group buy, then I can wait ;)

[Mechie3]

No group buy. I already ordered parts (and have them in hand) so I can benefit from buying large quantities. I just guessed at potential demand and ordered a handful.

[Mechie3]

Almost forgot. I have a $10 discount good if you buy the hood and trunk louvers. If you buy the hood louvers or trunk louver and the fender vents you get a $5 discount. Buy all three and get a $15 discount. Applies to previous orders.

[RM1SepEx]

send me a set Craig... I NEED those side vent scoops... :rolleyes:

[FFRSpec72]

There won't be much of the fiberglass left with all these vents (side vent, hood vents, bumper vents, trunk vents, fender vents, door vents, etc.) !

[Mechie3]

We needs some vents for the vents!

[Wayne Presley]

Those look great! I'm putting mine a little further back on the fender than Chad.

[C.Plavan]

Those look great! I'm putting mine a little further back on the fender than Chad.

I debated on exactly where I wanted them. I looked at pictures of other race cars and thats where I came up with the current location. I also have the door vents at the rear. The Wind Tunnel was booked. :)

[Wayne Presley]

The new Viper ACR has them centered over the tire. Talking with the engineers at the press introduction last week before the UTCC they work great, even better with just open holes...
I'll upload a better pic tonight

http://i213.photobucket.com/albums/cc175/vcpinjectionpb/818-build%201/20150716_120536_zpsqr0nxq0e.jpg (http://s213.photobucket.com/user/vcpinjectionpb/media/818-build%201/20150716_120536_zpsqr0nxq0e.jpg.html%5D%5BIMG%5Dht tp://i213.photobucket.com/albums/cc175/vcpinjectionpb/818-build%201/20150716_120536_zpsqr0nxq0e.jpg%5B/IMG%5D%5B/URL)

[65 Cobra Dude]

Craig,

PM sent.

Thx,

Henry

[Wayne Presley]

Better pic

http://i213.photobucket.com/albums/cc175/vcpinjectionpb/IMG_2150_zpsd54obc1z.jpg

http://i213.photobucket.com/albums/cc175/vcpinjectionpb/IMG_2824_zpsvw5dd7ys.jpg

[Mechie3]

Thats a pretty big hole!

[C.Plavan]

Some rules require them to be open because the carbon fiber "vents" would break off and puncture other people's tires. I like the look of vents better.

[Wayne Presley]

The red Viper has the vents in it, the other 4 did not. The engineer said that the car without the 6 hood screens and the two fender louvers removed it made over 70 lbs more downforce than with all the screens in

[Wayne Presley]

Thats a pretty big hole!

It was easy to check tire wear and make compression/rebound adjustment on the shocks :-)

[metros]

I'm in without a doubt for trunk and fenders. How far away are you from having the hump vents?

[Mechie3]

Got quotes today. Can order some tomorrow. They'd be here in little over a week most likely.

[Frank818]

I am adding to my list! 45 is cheap, at 90 I wouldn't have, but 45... hell F yeah!!

[Mechie3]

I am adding to my list! 45 is cheap, at 90 I wouldn't have, but 45... hell F yeah!!

Lol. If I get good quotes on prices I have better prices. I try to maintain consistent margins but truth is, if I had $1million I'd probably still do this and just sell everything at cost.


Shipped out a couple sets yesterday on my way home from my business trip.

[Frank818]

So, what are you waiting to have a million bucks, then?